maszyny do obróbki metalu / inne maszyny do obróbki metalu
Producent: DMG MORI
Model:DMF 260|11
Numer pozycji: 166192324
Ilość: 1
Data: 09.01.2025
Lokalizacja:
Niemcy
Cena:
Seller-item-No.:030322
| General | |
| in travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Heidenhain TNC 640 | |
| Working area 1 | |
| Cross | 1100 mm |
| Longitudinal | 2600 mm |
| Vertical | 900 mm |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 40000/40000/40000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 80/60/60 m/min |
| Tool changer | |
| Type of magazine | Chain |
| Type of gripper | Double gripper |
| Number of tools | 60 |
| Max. tool weight | 15 Kg |
| Max. tool diameter with occupied adjacent pockets | 115 mm |
| Max. tool length | 500 mm |
| Max. tool dia. with free neighbouring pockets | 160 mm |
| Direct measuring system | Direct path measuring system |
| Cabine | Full protection cabin |
| Dynamic package for DMF 260 linear (Y1100) | Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/19.68 ft/s² Active chiller for main spindle and Linear motor mag |
| Rigid table with integrated rotary axis (leftside) | Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position |
| Table surface 3200 x 1100 (Ø 1050) mm | |
| Slot width 18 mm | |
| Distance between T-Slots 100 mm | |
| Number of Slots 9 | |
| Rotation speed max.4. Axis 50 rpm | |
| Removable partition wall DMF260 (Y1100) | Partition wall removable for pendulum machining DMF260, 2 working spaces (possible with integrated round table) |
| Tool magazine 60 places SK50/HSK-A100 | Tool magazine 60 places SK50/HSK-A100 Chain type with double gripper |
| Spindle speed 20 - 10,000 rpm | Spindle speed 20 - 10,000 rpm HSK-A100 for tool taper according to DIN69893 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% ED) |
| 3D quickSET elevated constructuion | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe) |
| Oil mist separator | Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h |
| Signal lamp 4-colour | Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, D5152871 maintained air, low oil rate possible |
| Inner coolant supply 40Bar/980l | Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle |
| Chip flushing for working area | Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included |
| Door drive for working area doors | Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents |
| MPC Machine Protection Control | MPC Machine Protection Control Machine protection by quick shutdown |
| Application Tuning Cycle ATC | Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| 2016 | DMG MORI | DMF 260/11 | |
| DMG MORI | DMF 260|11 | ||
| DMG MORI | DMF 260|11 | ||
| 2016 | DMG MORI | DMF 260/11 KGT | |
| 2016 | DMG MORI | DMF 260/11 KGT | |
| DMG MORI | DMF 300|11 | ||
| DMG MORI | DMF 300|11 | ||
| DMG MORI | DMF 400|11 | ||
| DMG MORI | DMF 300|8 |
